Description
The heat pump dryer main parts including compressor, heat exchanger , choke, heat absorber - compressor unit constitute a circulation system, etc. Under the action of refrigerant in the compressor circulating in the system. It made within the compressor gas booster heating process (temperature up to 100 ºC), heat release it into the machine-- high temperature heating drying room air, while being cooled and translated into flow liquid when it runs to the outside machine, rapid heat evaporating liquid into a gas again, at the same time, the temperature dropped to minus 30 ºC, 20 ºC, the air surrounding the heat absorber will continue to transfer heat to the refrigerant. The refrigerant cycle is constantly realize heat from the air transport to the drying room heating the air inside the room.
Advantages
Stable and consistent outlet pressure dew point
·Reasonable simplified design ensures that the compressed air and desiccant contact time is 4.8 seconds to meet the dew point requirements of finished gas;
·30% of the remaining amount of desiccant, desiccant and compensation with the natural aging, to ensure that the drying effect;
·Large diffuser to ensure uniform air flow through the desiccant layer, eliminating channeling phenomenon.
Regeneration loss less than 12%
·Excellent barrel design, saving 95% of the heat absorbed, the stored heat is used to increase regeneration regeneration temperature of regeneration stage, improve the desorption capacity of the equipment, making the regeneration completely;
·Drying and regeneration using reverse convection, wet air flow through the best effect when the adsorbent;
·The amount of regeneration gas can be adjusted according to the operating load demand of the dryer.
Our Service
1. Allocation chart as the buyer’s request will be supplied.
2. Operation manual will be supplied after shipment.
3. One year warrantee, life time maintenance with cost price.
4. Free easy broken spare parts will be sent with container .
5. First installation can be done by engineer.
6. Training workers in customer’s factory.